| S-25MF (Maintenance Free) All Bronze 1/12 hp, 115/1/60, Less Flanges | A longer circulator life without maintenance (regular oil lubrication is not required) no more oil pools on floor | Stainless steel face plate, coupler face guard meets or exceeds OSHA standards | The standard for 65 years in hydronics | Repairable, replaceable, environmentally friendly and now maintenance free

1725 Rpm, 115 Volt, 60Hz | Flanged Connections | Flanges Included

1725 Rpm, 115 Volt, 60Hz | Flanged Connections | Flanges Included

1725 Rpm, 115 Volt, 60Hz | Flanged Connections

1/6 Hp Motor, 1750 Rpm, 115V, 60Hz | For Use On 1" Through 1-1/2" Pipes | Higher Flow and Head | Quiet, Efficient Operation | Replaces Armstrong #H32

| Single speed | For use on 3/4" through 1-1/2" pipes | Polypropylene impeller | 1/25 hp motor | For heating and cooling applications | Bronze body model for potable water | Up to 80% more starting torque than competing circulators | Replaces Armstrong #ASTRO 30B

100% Lead Free For Potable Water Systems Dura-Glide Bearing System Assures Whisper-Quiet, Maintenance Free Operation | 3 Year Warranty | Flanges SOLD SEPARATELY

Red Fox Single Speed. For Use On 3/4" Through 1-1/2" Pipes. System Lubricating. Polypropylene Impeller, Flange Gaskets Included. For Heating and Cooling Applications. Material: Iron. Hp: 1/25. Rpm: 2800. Armstrong: Astro-30.

Maintenance Free Motor and Pump Assembly | Permanently Lubricated, Dry Motor | 3 Year Warranty | Flanged Connections | Flanges SOLD SEPARATELY

Maintenance Free Motor and Pump Assembly | Permanently Lubricated, Dry Motor | 3 Year Warranty | Flanged Connections | Flanges SOLD SEPARATELY

1725 Rpm, 115 Volt, 60Hz | Flanged Connections

115V. 3 Piece Design Features Replaceable Parts. For Use On 3/4" Through 1-1/2" Pipes. Bronze. Hp: 1/12. Rpm: 1750. Armstrong: S-25. Taco: 110B.

115V. 3 Piece Design Features Replaceable Parts. For Use On 3/4" Through 1-1/2" Pipes. Iron. Hp: 1/12. Rpm: 1750. Armstrong: S-25. Taco: 110.

| Heavy duty cast iron construction | A.O. Smith, 2-compartment, square flange, dual voltage 115/230 volt motor with thermal overload protection | Rugged one-piece, close grain cast iron pump body and seal plate with drain port | Silicon bronze impeller with shaft seals | 416 stainless steel shaft | Carbon/ceramic and Buna-N seals | Replaceable wear ring and back pull-out design for easy serviceability | Maximum temperature: 225°F | UL listed

Replacement Motor For Most Popular Bell & Gossett 100 Series and Armstrong S-25 Series Pumps | 1 Amp, 115V, 60 Hz | Thermally Protected

Armstrong -- Circulator Pump Oil. 1/2 Oz.

| Dimensions: 6-1/2 in. A to B ports End to End | Materials: Housing--Cast Iron; Bearings and Shaft--Ceramic | Voltage: 115V at 60 Hz | Ambient Temperature Range: 32 F to 104 F | Ambient Temperature Range: 0 C to 40 C | Maximum flow rate: 15 gpm | Pressure Head: 19 | Current Draw: Nominal (minimum speed)--0.3; Nominal (maximum speed)--0.75 | Maximum Water Pressure: 145 psi | Fluid Temperature: 110 C Maximum | Fluid Temperature: 230 F Maximum | Maximum Noise Rating: Driving (dB(A) @ 1m)-- 43

| Dimensions: 6-1/2 in. A to B ports End to End | Materials: Housing--Cast Iron; Bearings and Shaft--Ceramic | Voltage: 115V at 60 Hz | Ambient Temperature Range: 32 F to 104 F | Ambient Temperature Range: 0 C to 40 C | Maximum flow rate: 15 gpm | Pressure Head: 19 | Current Draw: Nominal (minimum speed)--0.3; Nominal (maximum speed)--0.75 | Maximum Water Pressure: 145 psi | Fluid Temperature : 110 C Maximum | Fluid Temperature: 230 F Maximum | Maximum Noise Rating: Driving (dB(A) @ 1m)-- 43

| Dimensions: 8-1/2 in. A to B ports End to End | Materials: Housing--Cast Iron; Bearings and Shaft--Ceramic | Voltage: 115V at 60 Hz | Ambient Temperature Range: 32 F to 104 F | Ambient Temperature Range: 0 C to 40 C | Maximum flow rate: 45 gpm | Pressure Head: 17 | Current Draw: Nominal (minimum speed)--1.1; Nominal (maximum speed)--1.7 | Maximum Water Pressure: 145 psi | Fluid Temperature: 110 C Maximum | Fluid Temperature: 230 F Maximum | Maximum Noise Rating: Driving (dB(A) @ 1m)-- 43

Johnson Pump Basspirator Livewell Aerating Kit

Basspirator pumps are designed for serious fishermen who need frequent circulation of fresh water into their livewells and baitwells.

As clean water is pumped into the livewell, water and debris pass through the overflow fitting.

The kit includes cartridge, 500 GPH cartridge pump, 7' of 3/4" hose, aerating head, two 1-1/2" overflow fittings and hose, illuminated fuse switch, hose clamps, 16' of 16-gauge wire and instructions. 12V, 1.4Amp draw

CM90 Circulation Pump - 17.2GPM - 12V - 3/4" Outlet

CM90 circulation pumps are a line of compact magnetic driven centrifugal pumps which combine high flow rates with very low electric current consumption. Suitable for fresh water, ethylene glycol and salt water circulation. Glass-fiber reinforced PPA body.

Specifications:

• System Pressure:-0.3 to 3.0 bar; stationary max. 4.0 bar
  
• Liquid: Water/glycol mixture; max. 60% glycol, fresh and salt water
  
• Motor service life: More than 5,000 hours at nominal voltage, 10,000 start/stops. Interchangeable motor
  
• Dry running: 30 minutes
  
• Dimensions: 244mm L x 120mm W x 150mm H
  
• Weight: 6.6lbs
  
• Capacity: 17.2 GPM
  
• Ports: 3/4"

CM90 Circulation Pump - 23.7GPM - 12V - 1-½" Outlet

A line of compact magnetic driven centrifugal pumps which combine high flow
rates with very low electric current consumption. Suitable for fresh water,
ethylene glycol and salt water circulation.

System Pressure: -0.3 to +3.0 bar; stationary max. 4.0 bar
Liquid: water/glycol mixture; max. 60% glycol, fresh and salt water
Motor Service Life: More than 5,000 hours at nominal voltage 10,000
start/stops. Interchangeable motor.
Motor, Voltage: Nominal 13.6V DC for use between 10-16V Nominal 27.2V
DC for use between 20-32V
Input Power: Max. 125W
Dry Running: 30 minutes
Dimensions: 244mm (L) x 120mm (W) x 150mm (H)
Ports:Ø 20mm (3/4") & Ø 38mm (1-1/2")
Weight: 3.0kg (6.6lbs)
Body: PPA, glass-fiber reinforced
Mounting: Separate universal bracket for flat surfaces

CM90P7-1 27.2V Circulation Pump D20

CM90P7 circulation pumps are a line of compact magnetic driven centrifugal pumps which combine high flow rates with very low electric current consumption. Suitable for fresh water, ethylene glycol and salt water circulation. Glass-fiber reinforced PPA body.

Taco OnCommand Systems are manufactured using the highest quality U.S. made component parts available. Patented Integral Flow Checks (IFC) are built into each OnCommand pump to prevent cold water from entering the hot water line. Patented ACT OnCommand Electronics are the controls for each OnCommand System. This state-of-the-art electronics allows the system to accurately sense temperature and automatically shut off the system to maximize comfort and energy savings. OnCommand Systems are the only recirculation product that saves both energy and water approved by the US Department of Energy and State Energy Commissions. You can look forward to over 15 years of life expectancy with a Taco OnCommand System. | Includes: | "00" Cartridge circulating pump with built-in OnCommand Electronics, power cord, Integral Flow Check (IFC) and mounting bracket | Starter button | Set of two (2) 1/2" plumbing adapter tees | Set of two (2) 1/2" stainless steel flex lines | 115 volt | 3,250 RPM

Taco OnCommand Systems are manufactured using the highest quality U.S. made component parts available. Patented Integral Flow Checks (IFC) are built into each OnCommand pump to prevent cold water from entering the hot water line. Patented ACT OnCommand Electronics are the controls for each OnCommand System. This state-of-the-art electronics allows the system to accurately sense temperature and automatically shut off the system to maximize comfort and energy savings. OnCommand Systems are the only recirculation product that saves both energy and water approved by the US Department of Energy and State Energy Commissions. You can look forward to over 15 years of life expectancy with a Taco OnCommand System. | Includes: | "00" Cartridge circulating pump with built-in OnCommand Electronics, power cord, Integral Flow Check (IFC) and mounting bracket | Starter button | Set of two (2) 1/2" plumbing adapter tees | Set of two (2) 1/2" stainless steel flex lines | 115 volt | 3,250 RPM

The 006 Plumb n' Plug Cartridge Circulators are designed to conserve water, increase comfort and reduce the delivery time of hot water to outlet fixtures by periodically re-circulating hot water through the system. An average residence can save up to 25 gallons of wasted water per day. Factory pre-wired 6 foot line cord with 7 day digital programmable clock timers allow for easy installation. Simply Plumb it in, then Plug it in. Plumb n' Plug circulators include all the standard 00 maintenance-free design features-no mechanical seal, self lubricating, replaceable cartridge, quiet, efficient operation and unmatched reliability. | 7 Day Programmable Digital Timer Allows Up To 10 On/Off Settings | Multiple Settings Allow For Different Weekday/Weekend Run Times | UL Listed| Standard High Capacity Output | Compact Design | Quiet, Efficient Operation | Direct Drive-Low Power Consumption | Unique Replaceable Cartridge Design-Field Serviceable | No Mechanical Seal | Unmatched Reliability-Maintenance Free | Bronze Construction with Sweat Connections.

The 006 Plumb n' Plug Cartridge Circulators are designed to conserve water, increase comfort and reduce the delivery time of hot water to outlet fixtures by periodically re-circulating hot water through the system. An average residence can save up to 25 gallons of wasted water per day. Factory pre-wired 6 foot line cord with 7 day digital programmable clock timers allow for easy installation. Simply Plumb it in, then Plug it in. Plumb n' Plug circulators include all the standard 00 maintenance-free design features-no mechanical seal, self lubricating, replaceable cartridge, quiet, efficient operation and unmatched reliability. | 7 Day Programmable Digital Timer Allows Up To 10 On/Off Settings | Multiple Settings Allow For Different Weekday/Weekend Run Times | UL Listed| Standard High Capacity Output | Compact Design | Quiet, Efficient Operation | Direct Drive-Low Power Consumption | Unique Replaceable Cartridge Design-Field Serviceable | No Mechanical Seal | Unmatched Reliability-Maintenance Free | Bronze Construction with Sweat Connections.

| Ideal for lawn sprinkling, garden irrigation, dewatering, and booster service | Fiberglass reinforced thermoplastic housing for the highest corrosion resistance | Self priming | 115/230V (factory set at 230V) | 1-1/2 HP | 1-1/2" suction and discharge connections

| 125 PSI maximum working pressure; 40° F-220° F fluid temperature. Quiet, efficient operation; self-lubricating; no mechanical seal. | Direct drive design; low power consumption. Unique replaceable cartridge design is field serviceable. | 003 series uses include domestic hot water recirculation, heat recovery, water source pumps and potable water systems. | 005 series uses include hydronic heating, add a zone additions, zoning with circulators, chilled water and domestic water systems. | 006 series uses include hydronic heating, domestic hot water recirculation, hydro-air heating/cooling, heat recovery units, water source heat pumps, drain down open loop solar systems, and potable water systems. | 007 series uses include hydronic heating, radiant heating, hydro-air fan coils, indirect water heaters, chilled fresh water, and domestic water recirculation systems. | 008 uses include hydronic heating, radiant in-floor/panel heating and closed-loop solar heating systems. The bronze can be used for higher head heat recovery, water source heat pump, open-loop solar heat and domestic water recirculation systems. | 010 series uses include hydronic heating, radiant heating, primary-secondary loops, indirect water heaters, chilled water cooling, and potable water systems. | 011 series uses include high pressure drop boilers, fan coil units, heat exchangers, large radiant heating and heat recovery/geothermal systems. | 012 series uses include large BTUH boilers, 2" recirculation loops, primary/secondary loops, commercial water heaters and light commercial heating and cooling systems. | 013 uses include high pressure drop boilers, fan coil units, heat exchangers, large radiant systems, heat recovery and geothermal systems. | Designed for a wide range of water circulating applications. High capacity output in a compact design. 3250 RPM.